Project

General

Profile

Roadmap

0.07.0 - Networking

open

91%

12 issues   (11 closed — 1 open)

Related issues
Feature #65: Add USB eth support Actions
Feature #91: integrate udev to support USB networking Actions
Feature #105: Add NetworkManager to Buildroot configuration Actions
Feature #106: Switch from mdev (busybox) to udev (buildroot) in order to support NetworkManager. Actions
Feature #109: Add scripts for bringing up wireless Actions
Action Item #110: verify build on Ubuntu Actions
Action Item #118: Verify build on CentOS Actions

0.08.0 - DSP/SGX

open

82%

32 issues   (25 closed — 7 open)

Related issues
Feature #26: Switch BeagleBox build to use BUI distribution, dropping Matchbox from Buildroot Actions
Feature #37: Integrate DSP support into build Actions
Feature #57: Attempt to integrate SGX patches into default kernel build Actions
Feature #63: Make a patch against u-boot BeagleBoard config to reduce boot delay to build-configurable time. Actions
Feature #78: Need process for handling kernel modules at boot time Actions
Feature #84: Add firmware retrieval mechanism Actions
Feature #92: Add ability to set console port in boot-sd.txt at build time Actions
Feature #101: add omapfbplay to rootfs build Actions
Feature #103: Keyboard/mouse are not working connected to USB port Actions
Feature #116: Add Meego UI for connman as a Buildroot package Actions
Feature #117: Add init script for X.org Actions
Feature #121: Integrate rc.pvr into init scripts Actions
Testing #95: Verify DSP/gstreamer tools allow video playback Actions
Testing #99: Verify build on Ubuntu Actions
Testing #100: Need a top level readme file Actions
Action Item #74: Migrate from CVS to git Actions
Action Item #122: Create opkg for toolchain debug tools Actions
Action Item #124: Rev SGX to 4.08.00.01 Actions
Action Item #125: Integrate new xorg driver Actions

1.0 - Galileo

open

46%

16 issues   (7 closed — 9 open)

Related issues
Feature #16: Add a boot splash and turn off console output Actions
Feature #39: Create initramfs that will switch_root to run time root file system Actions
Feature #40: Run time file system image needs to mount /tmp to ram disk Actions
Feature #42: Update env vars in u-boot code Actions
Feature #43: S-Video output configuration needs to be identified Actions
Feature #86: Create an XBMC build - make it an opkg Actions
Testing #10: Review open source flash players Actions
Testing #11: Track availability of Flash on ARM Actions
Testing #44: Update x-loader, u-boot in NAND on C4 board Actions
Testing #62: Write up on the wiki how to modify the boot script, build it and use it Actions