PiBox » Iron Man

{{>toc}}

h1. Hardware Links

* "List of IoT hardware":https://www.linux.com/news/linux-and-open-source-hardware-iot

* "Raspberry Pi":http://www.raspberrypi.org

* CHiP

* [[ESP8266]]

** "Pinouts":http://www.esp8266.com/wiki/doku.php?id=esp8266_gpio_pin_allocations

** "Module Family":http://www.esp8266.com/wiki/doku.php?id=esp8266-module-family

** "ESP Open SDK":https://github.com/pfalcon/esp-open-sdk - open source SDK for ESP8266

** "Arduino Core SDK reference":http://arduino.esp8266.com/versions/1.6.5-1106-g8253b82/doc/reference.html

** ""NodeMCU":https://github.com/nodemcu/nodemcu-firmware - lua based firmware for MCU like ESP8266

*** This has links to "esptool":https://github.com/themadinventor/esptool for flashing firmware to device

** "ESPlorer":https://github.com/4refr0nt/ESPlorer is a Java IDE for the ESP8266

** "Arduino core for ESP8266":https://github.com/esp8266/Arduino - look under doc for libraries, etc.

** "ESP8266 Arduino forum":http://www.esp8266.com/viewforum.php?f=25

** "Loading Firmware":http://www.esp8266.com/wiki/doku.php?id=loading_firmware

** "Getting Started":http://www.esp8266.com/wiki/doku.php?id=getting-started-with-the-esp8266

** "Getting Started":http://rancidbacon.com/files/kiwicon8/ESP8266_WiFi_Module_Quick_Start_Guide_v_1.0.4.pdf pdf (different version)

** "AT Commands":https://room-15.github.io/blog/2015/03/26/esp8266-at-command-reference/

*** "Get MAC address":https://room-15.github.io/blog/2015/03/26/esp8266-at-command-reference/#AT+CIPSTAMAC

** "Wifi Serial Programmer":http://www.aliexpress.com/item/ESP8266-serial-WIFI-Witty-cloud-Development-Board-ESP-12F-module-MINI-nodemcu/32569199462.html?spm=2114.01010208.3.2.ktKerQ&ws_ab_test=searchweb201556_6,searchweb201644_2_505_506_503_504_502_10014_10001_10002_10017_10010_10005_10011_10006_10003_10004_10009_10008,searchweb201560_3,searchweb1451318400_-1,searchweb1451318411_6451&btsid=7bb785c5-4c85-425b-a3cd-bdbeb3d473fc that replaces the FTDI Basic Board because the latter has weak voltage regulation.  Also consider using the ESP-12 (also called an NodeMCU when it includes the Lua code) instead, which is more forgiving with power.

** Examples

*** "One Way Chat, part 2":https://www.youtube.com/watch?v=iRMdj3dS2hc shows how to connect basic hardware (somewhat limited) and program to run as a web server using stock programs.

*** "HTTP I/O":http://www.instructables.com/id/ESP8266-HTTP-IO-Server/ is a "library":https://github.com/jscottb/ESP8266_http_io that gives direct access to GPIO pins.  This is essentially what we'd want except it needs to be "wrapped in a security layer":http://www.esp8266.com/viewtopic.php?f=23&t=3929 of "some kind":https://github.com/mziwisky/esp8266-dev/blob/master/esphttpd/user/auth.c.  

** "ESP8266 5V WIFI Relay Module":https://www.banggood.com/ESP8266-5V-WiFi-Relay-Module-Internet-Of-Things-Smart-Home-Phone-APP-Remote-Control-Switch-p-1126605.html?gmcCountry=US&currency=USD&createTmp=1&utm_source=googleshopping&utm_medium=cpc_elc&utm_content=zouzou&utm_campaign=https://www.banggood.com/ESP8266-5V-WiFi-Relay-Module-Internet-Of-Things-Smart-Home-Phone-APP-Remote-Control-Switch-p-1126605.html%3FgmcCountry%3DUS%26currency%3DUSD%26createTmp%3D1%26cur_warehouse%3DCN&cur_warehouse=CN

h1. Door/Window Alarm

* "Magnetic Reed Switch Door sensors":http://www.ebay.com/itm/350944895445?rmvSB=true

* "Sample project":http://www.simpleiothings.com/10-diy-door-sensor/

h1. Monitor (Home automation server)

* "WD PiDrive":https://www.wdc.com/products/wdlabs/wd-pidrive-foundation-edition.html - will be used to store video from cameras.

* "GungHo PiDrive":http://gungho.io/product/pidrive/ - about the same price but directly attaches to the Pi.  Might not have the power savings provided by WD PiDrive.

* Wifi Hat

** "Redbear":https://redbear.cc/content/blog/pi-zero-iot-hat/ - WiFi and Bluetooth + BLE

** "Adafruit":https://www.adafruit.com/product/3283 - WiFi and Bluetooth + BLE; same as Redbear

h1. Sensor

* Pair Button (should include LEDs for states: normal, paired, pairing)

** http://www.instructables.com/id/How-to-use-a-Push-Button-Arduino-Tutorial/

** http://www.instructables.com/id/Arduino-Button-Tutorial/

** https://learn.sparkfun.com/tutorials/sik-experiment-guide-for-arduino---v33/experiment-5-push-buttons

* "BME680":https://shop.pimoroni.com/products/bme680-breakout?utm_source=Shopify&utm_campaign=254da1ab79-EMAIL_CAMPAIGN_2018_06_29_09_37&utm_medium=email&utm_term=0_3772e11665-254da1ab79-104683421&goal=0_3772e11665-254da1ab79-104683421&mc_cid=254da1ab79&mc_eid=9f1666db19 Environment Sensors Breakout ("Adafruit version":https://learn.adafruit.com/adafruit-bme680-humidity-temperature-barometic-pressure-voc-gas/overview)

h1. AC Control

# TRIACs: Low cost, high current handling capability. 

# Traditional relay: moving parts, relatively low cost, very high current

# Solid State Relay: Higher cost, no moving parts. Advantage over TRIACs is that SSR can interrupt current at any point in the AC waveform. TRIACs only cut off current at the zero-crossing point.

# "Step-Down Converter":https://www.ebay.com/itm/3-3V-600mA-AC-DC-Power-Supply-Buck-Converter-Step-Down-Module-2-5-W-/352515657771?_trksid=p2349526.m4383.l4275.c1#viTabs_0 - AC to DC 3.1V-3.5V.

## And companion "5V to 3V converter":https://www.aliexpress.com/item/0-7-5V-to-3V-3-3V-5V-DC-DC-Boost-Converter-voltage-Step-up-Module/32800430445.html

h1. DC Control

TBD

h1. Battery Backup

* "Arduino battery backup circuit":https://www.allaboutcircuits.com/projects/battery-backup-power-supplies/

* "Simple 5V battery backup circuit":http://www.instructables.com/id/Simple-5v-battery-backup-circuit/

* "3.7V 9V 5V 2A Adjustable Step Up 18650 Lithium Battery Charging Discharge":https://www.ebay.com.au/itm/3-7V-9V-5V-2A-Adjustable-Step-Up-18650-Lithium-Battery-Charging-Discharge-I-D6O6/223565480452?_trkparms=aid%3D555018%26algo%3DPL.SIM%26ao%3D1%26asc%3D20190212102350%26meid%3D8b54b5eb9ecd4ae4a7486c3e653f0ee6%26pid%3D100012%26rk%3D1%26rkt%3D3%26sd%3D113698283835%26itm%3D223565480452%26pmt%3D1%26noa%3D0%26pg%3D2047675&_trksid=p2047675.c100012.m1985

h1. Stepper Motor Control

# TI DRV8811: Integrated FETs, up to 1.9A per coil http://www.ti.com/lit/ds/symlink/drv8811.pdf

# (Toshiba?) TB6612: Used on adafruit and other boards: https://www.adafruit.com/products/2448 Documentation/sourcing appears limited

h1. 3D Printing

h2. Designing

* "Your Guide To Making Electronics Project Boxes":https://www.ponoko.com/blog/how-to-make/making-enclosures-for-electronics-with-ponoko/?utm_source=Ponoko+Newsletter&utm_campaign=b6f66c6ebd-EMAIL_CAMPAIGN_2018_05_22&utm_medium=email&utm_term=0_218f094e4f-b6f66c6ebd-39524281

h2. Robo3D

* "Linux Software for Robo3D":http://community.robo3d.com/index.php?threads/linux-software-for-the-robo-3d-r1-and-other-3d-printers.19881/

* "Alternative firmware":Marlin":http://marlinfw.org/

* "Mattercontrol Getting Started":https://www.matterhackers.com/articles/mattercontrol-getting-started

* "Updated Robo firmware":http://community.robo3d.com/index.php?threads/how-to-update-and-edit-robo-firmware-with-arduino.5227/