• Table of contents
• Hardware Links
• Door/Window Alarm
• Monitor (Home automation server)
• Sensor
• AC Control
• DC Control
• Battery Backup
• Stepper Motor Control
• 3D Printing
  • Designing
  • Robo3D

Hardware Links¶

• List of IoT hardware
• Raspberry Pi
• CHiP
• ESP8266
  • Pinouts
  • Module Family
  • ESP Open SDK - open source SDK for ESP8266
  • Arduino Core SDK reference
  • "NodeMCU - lua based firmware for MCU like ESP8266
    • This has links to esptool for flashing firmware to device
  • ESPlorer is a Java IDE for the ESP8266
  • Arduino core for ESP8266 - look under doc for libraries, etc.
  • ESP8266 Arduino forum
  • Loading Firmware
  • Getting Started
  • Getting Started pdf (different version)
  • AT Commands
    • Get MAC address
  • Wifi Serial Programmer that replaces the FTDI Basic Board because the latter has weak voltage regulation. Also consider using the ESP-12 (also called an NodeMCU when it includes the Lua code) instead, which is more forgiving with power.
  • Examples
    • One Way Chat, part 2 shows how to connect basic hardware (somewhat limited) and program to run as a web server using stock programs.
    • HTTP I/O is a library that gives direct access to GPIO pins. This is essentially what we'd want except it needs to be wrapped in a security layer of some kind.
  • ESP8266 5V WIFI Relay Module

Door/Window Alarm¶

• Magnetic Reed Switch Door sensors
• Sample project

Monitor (Home automation server)¶

• WD PiDrive - will be used to store video from cameras.
• GungHo PiDrive - about the same price but directly attaches to the Pi. Might not have the power savings provided by WD PiDrive.
• Wifi Hat
  • Redbear - WiFi and Bluetooth + BLE
  • Adafruit - WiFi and Bluetooth + BLE; same as Redbear

Sensor¶

• Pair Button (should include LEDs for states: normal, paired, pairing)
  • http://www.instructables.com/id/How-to-use-a-Push-Button-Arduino-Tutorial/
  • http://www.instructables.com/id/Arduino-Button-Tutorial/
  • https://learn.sparkfun.com/tutorials/sik-experiment-guide-for-arduino---v33/experiment-5-push-buttons
• BME680 Environment Sensors Breakout (Adafruit version)

AC Control¶

1. TRIACs: Low cost, high current handling capability.
2. Traditional relay: moving parts, relatively low cost, very high current
3. Solid State Relay: Higher cost, no moving parts. Advantage over TRIACs is that SSR can interrupt current at any point in the AC waveform. TRIACs only cut off current at the zero-crossing point.
4. Step-Down Converter - AC to DC 3.1V-3.5V.
   1. And companion 5V to 3V converter

DC Control¶

TBD

Battery Backup¶

• Arduino battery backup circuit
• Simple 5V battery backup circuit
• 3.7V 9V 5V 2A Adjustable Step Up 18650 Lithium Battery Charging Discharge

Stepper Motor Control¶

1. TI DRV8811: Integrated FETs, up to 1.9A per coil http://www.ti.com/lit/ds/symlink/drv8811.pdf
2. (Toshiba?) TB6612: Used on adafruit and other boards: https://www.adafruit.com/products/2448 Documentation/sourcing appears limited

3D Printing¶

Designing¶

• Your Guide To Making Electronics Project Boxes

Robo3D¶

• Linux Software for Robo3D
• "Alternative firmware:Marlin
• Mattercontrol Getting Started
• Updated Robo firmware