Action Item #280
closed
Need a default network config for firstboot
Added by Hammel over 10 years ago.
Updated almost 10 years ago.
Description
The system should have a default network configuration that should be accessible via wired eth. That way the device can be configured remotely via the web interface.
- Target version changed from 1.0 - Atreides to 0.9.0
- Priority changed from Normal to Urgent
- Severity changed from 03 - Medium to 04 - Low
- Priority changed from Urgent to Normal
- Target version changed from 0.9.0 to 0.10.0
- Priority changed from Normal to Immediate
- Severity changed from 04 - Low to 02 - High
- Project changed from PiBox to pibox-network-config
- Category deleted (
04 - Root File System)
- Status changed from New to In Progress
- % Done changed from 0 to 10
There doesn't need to be a default setting. All interfaces can be disabled. The Media Server and Media Player offer a UI that allows configuration easily enough.
However, the displayed IP address should be blank if the interface is not enabled. I believe the address displayed is bogus if the interface is not enabled. The address is shown in the bottom left of the bui-network-config UI.
- Priority changed from Immediate to Urgent
- % Done changed from 10 to 70
- Severity changed from 02 - High to 04 - Low
Updates were added to showIPInStatusBar() to (hopefully) better identify if the selected interface is available and running before attempting to get its IP address. Also added more calls to showIPInStatusBar() so when changes are initiated by the program the IP is correctly updated to reflect the changes.
This may not be completely correct but its better than it was.
Pushing back to the end of the 0.10 cycle to give me time to test it more.
- Status changed from In Progress to Closed
- % Done changed from 70 to 100
This appears to be working fine now. The correct IP address is shown for enabled interfaces and nothing is shown for disabled interfaces.
Closing issue.
Also available in: Atom
PDF
Updated by