Hardware Links » History » Version 7
Hammel, 04 Feb 2016 20:03
| 1 | 1 | Hammel | h1. Hardware Links |
|---|---|---|---|
| 2 | |||
| 3 | * "Raspberry Pi":http://www.raspberrypi.org |
||
| 4 | * CHiP |
||
| 5 | 6 | Gale | * [[ESP8266]] |
| 6 | 7 | Hammel | ** "ESP Open SDK":https://github.com/pfalcon/esp-open-sdk - open source SDK for ESP8266 |
| 7 | ** ""NodeMCU":https://github.com/nodemcu/nodemcu-firmware - lua based firmware for MCU like ESP8266 |
||
| 8 | *** This has links to "esptool":https://github.com/themadinventor/esptool for flashing firmware to device |
||
| 9 | ** "ESPlorer":https://github.com/4refr0nt/ESPlorer is a Java IDE for the ESP8266 |
||
| 10 | ** "Arduino core for ESP8266":https://github.com/esp8266/Arduino - look under doc for libraries, etc. |
||
| 11 | ** "ESP8266 Arduino forum":http://www.esp8266.com/viewforum.php?f=25 |
||
| 12 | 2 | Gale | |
| 13 | h1. AC Control |
||
| 14 | |||
| 15 | # TRIACs: Low cost, high current handling capability. |
||
| 16 | # Traditional relay: moving parts, relatively low cost, very high current |
||
| 17 | # Solid State Relay: Higher cost, no moving parts. Advantage over TRIACs is that SSR can interrupt current at any point in the AC waveform. TRIACs only cut off current at the zero-crossing point. |
||
| 18 | |||
| 19 | h1. DC Control |
||
| 20 | 5 | Gale | |
| 21 | 4 | Gale | TBC |
| 22 | 2 | Gale | |
| 23 | h1. Stepper Motor Control |
||
| 24 | |||
| 25 | 1 | Hammel | # TI DRV8811: Integrated FETs, up to 1.9A per coil http://www.ti.com/lit/ds/symlink/drv8811.pdf |
| 26 | 3 | Gale | # (Toshiba?) TB6612: Used on adafruit and other boards: https://www.adafruit.com/products/2448 Documentation/sourcing appears limited |