Actions
Action Item #834
closed
Test piplayer with 5.10.y kernel
Start date:
16 Apr 2021
Due date:
% Done:
100%
Estimated time:
Severity:
01 - Critical
Description
Just to make sure pinet is working without gpio.
Updated by Hammel over 3 years ago
- Category set to 09 - Testing
- Assignee set to Hammel
- Priority changed from Normal to Immediate
- Target version set to 2.0 - Harkonnen
- Severity changed from 03 - Medium to 01 - Critical
Updated by Hammel over 3 years ago
- Status changed from New to In Progress
- % Done changed from 0 to 10
Three bugs:
- config.txt disables wifi on RPi3. That needs to be taken out.
- imwww reports "cannot connect to monitor" and does not update interfaces or wpa_supplicant.
- imwww shows "Ironman" banner. That's RM #814.
Updated by Hammel over 3 years ago
- % Done changed from 10 to 30
The failed to connect to monitor error is because piboxd is not running because the init script changed and there is an error passing args to piboxed via start-stop-daemon.
The wifi config change needs to go into pinet's postinst script.
Updated by Hammel over 3 years ago
- % Done changed from 30 to 40
Both fixes are ready to test in their respective sandboxes.
Updated by Hammel over 3 years ago
- Status changed from In Progress to Closed
- % Done changed from 40 to 100
Fixes verified with a full metabuild, meaning all changes have been pushed.
piplayer working fine with 5.10.y kernel and RPi3 wifi.
Closing issue.
Actions