Project

General

Profile

Actions

Feature #809

closed

Add configuration and reboot options to piplayer launcher

Added by Hammel over 3 years ago. Updated almost 3 years ago.

Status:
Closed
Priority:
Immediate
Assignee:
Category:
04 - Applications
Target version:
Start date:
15 Feb 2021
Due date:
% Done:

100%

Estimated time:
Severity:
03 - Medium

Description

These should be shown at the bottom of the display.
They should fill the bottom, half on each side, but only be a small height (30 pixels or so?).
They should be accessible via the touch screen or the keyboard.

Launcher should get a status bar with the following displayed.
  1. Date/time, if available
  2. WiFi mac/ip address
  3. eth0 mac/ip address
  4. reboot (same as reboot.xml, but display in status bar)

reboot just reboots immediately.


Related issues

Related to PiBox - Action Item #768: Add PiBox FileServer meta buildClosedHammel21 Jun 2020

Actions
Actions #1

Updated by Hammel over 3 years ago

  • Priority changed from Urgent to Immediate
  • Severity changed from 02 - High to 03 - Medium
Actions #2

Updated by Hammel almost 3 years ago

Actions #3

Updated by Hammel almost 3 years ago

  • Description updated (diff)
Actions #4

Updated by Hammel almost 3 years ago

  • Status changed from New to In Progress
  • % Done changed from 0 to 10

I'm not sure why I wanted this. Wifi, eth and mac addresses belong in the network config utility, like pisentry. Reboot is a default icon that is disabled in some cases - it can be turned back on for them.

What would be nice is to show the data and time at the top of the launcher window.

Actions #5

Updated by Hammel almost 3 years ago

  • Status changed from In Progress to Closed
  • % Done changed from 10 to 100

Implemented, tested on hardware.
Committed and pushed.

Closing issue.

Actions

Also available in: Atom PDF