PiBox

The last known working combination of kernel/firmware is

• Kernel: git commit 216324a8655b7256961a378893f290d7fa1eecc4 (4.19.69)
• fw: git commit 67bfaeb8457737053d8bab414d3d21c7587043cf

• kernel: git commit 742cb761fa7f2a25e9fc57afd72deb0c47b0c864 (4.19.106) or ecb440abef61d198478b6e598b3510ff6680090a (branch head at time of pull)
• fw: git commit bf83b506b4a6f9e592e711d02871a278fad5bd1e

The former is running on a test touchscreen and everything works. The latter is in rpi4, so I can just try that build.

If either works (the newer the better) then I should revert to those and rebuild the kernel and rpi-firmware, sticking with those commit ids instead of using the head.

Just tested the 4.19.106 kernel and touchscreen works. I'm going to copy that one to the broken release and see if that works. If not, then I'll copy the firmware too.

Verified: 4.19.106 + fw works but 4.19.122 + fw does not.

The 1.1.0 release will use 4.19.106, as will future release until I can figure out what broke.

I've added the git ids to firmware and kernel builds. Need to push them and then rebuild: rpifw, kernel, buildroot, busybox. Since that's most of it I might as well just kick off a complete rebuild of everything to run overnight.

Rebuilds completed for both rpi2 and rpi1 and retested as passed.

Changes committed and pushed.

Closing issue.