Project

General

Profile

Actions

Feature #592

open

Sensor Enclosure

Added by Hammel almost 7 years ago. Updated over 4 years ago.

Status:
New
Priority:
Low
Assignee:
Category:
Hardware
Start date:
28 Jul 2017
Due date:
% Done:

0%

Estimated time:
Severity:
03 - Medium

Description

This needs to enclose
  • The battery
  • The ESP8266 board
  • Power support
  • Any additional LEDs
  • Sensor connectors

This will connect to door/window sensors with two wires so the connectors must be exposed enough (if only before applying a hood to the enclosure) to make those connections.
The LED should be visible.
The battery must be accessible.

This is primarily for
  • Door / window sensor
  • Smart Plug
Actions #1

Updated by Hammel over 4 years ago

  • Subject changed from Enclosure to Sensor Enclosure
  • Description updated (diff)
  • Priority changed from Normal to Low
  • Target version changed from 0.5.0 to 2.0.0 - Dors Venabili
Actions

Also available in: Atom PDF