Project

General

Profile

Actions

Bug #409

closed

Missing hostapd values on save

Added by Hammel over 9 years ago. Updated over 9 years ago.

Status:
Closed
Priority:
Immediate
Assignee:
Category:
Settings
Target version:
Start date:
09 Dec 2014
Due date:
% Done:

100%

Estimated time:
Severity:
03 - Medium

Description

The following values were in /etc/hostapd.conf, but I'm not sure if they got there from bui-network-config or some other way.

wpa_pairwise=TKIP
macaddr_acl=0
ignore_broadcast_ssid=0
hw_mode=g

When Save is used on the hostap page these values were removed from the conf file.


Related issues

Related to PiBox - Feature #374: Add mac address filtering to hostapd configClosedHammel10 Aug 2014

Actions
Actions #1

Updated by Hammel over 9 years ago

  • Status changed from New to Closed
  • % Done changed from 0 to 100

Updated both piboxd and piboxwww to support passing the state of MAC ACL use in the MA_SETAP action. Then I updated the appropriate parts of the hostap g_slist in piboxd to include the missing lines. This fixes the problem of the missing lines when the web interface is used to configure the hostap setttings.

Tested on the target and all updates pushed upstream.

Closing issue.

Actions

Also available in: Atom PDF