Users Guide » History » Revision 3
Revision 2 (Hammel, 19 Sep 2019 14:50) → Revision 3/79 (Hammel, 19 Sep 2019 15:08)
h1. Users Guide
{{>toc}}
In this document the term _host system_ refers to a Linux desktop or laptop that will be used to download and install software
onto an SD card.
h2. The Ironman Monitor
The Ironman Monitor runs on a Raspberry Pi 2 or 3 and provides a central hub for management of home automation devices. Monitor
h3. Installation Prerequisites
* The Pi 2/3 requires a microSD card that is at least 4GB. A mechanism for using the SD card on your host system is needed, such as an SD card USB adapter or an SD port on your laptop.
* You will need to have sudo access for your Linux user id.
h3. Generating the SD Card for the Pi
* Download the RPi 2 Development Platform
** wget <url>
** Unpack the archive to a directory called "image".
* Download the Ironman Package Collection
** wget <url>
** Unpack the archive to a directory called "package".
In a terminal window run: dmesg -w
Insert the microSD card and look for the device name for the newly added card. It should be something like /dev/sdb or /dev/sde.
Kill the dmesg -w command with Ctrl-C.
From the "image" directory
* Format the SD card
** sudo ./mksd.sh -d <device name>
** where <device name> is the name you noted from the output of dmesg -w.
* Mount the boot partition from the sd card:
** sudo mkdir -p /mnt/boot
** sudo mount <device name>1 /mnt/boot
** where <device name> is the name you noted from the output of dmesg -w.
* Install the Development Platform to the SD card: sudo ./mkinstall.sh -b /mnt/boot -d <device name>2
** where <device name> is the name you noted from the output of dmesg -w.
From the "package" directory
* Mount the root partition from the sd card:
** sudo mkdir -p /mnt/root
** sudo mount <device name>1 /mnt/root
* Copy the Ironman Package Collection files to /root of the root partition on the SD card
** sudo cp *.opk /mnt/root/root
Make sure all writes to the SD card have completed
* sync;sync;sync
Unmount the SD card partitions
* sudo umount /mnt/boot
* sudo umount /mnt/root
Remove the SD card from the host system.
h3. First time boot
h3. Network configuration
h3. Pairing with IoT Sensors
h3. Pairing with Jarvis
h2. IoT Sensor
h3. Sensor Types
h4. Light Switch
h3. Flashing the firmware
h3. Power On
h3. Pairing with a Monitor
h2. Jarvis
h3. Prerequisites
h3. Pairing with a Monitor
h3. Supported Commands