|
1
|
random: Trying to read entropy from /dev/random
|
|
2
|
Configuration file: /etc/hostapd.conf
|
|
3
|
nl80211: interface wlan0 in phy phy0
|
|
4
|
rfkill: Cannot open RFKILL control device
|
|
5
|
nl80211: RFKILL status not available
|
|
6
|
nl80211: Using driver-based off-channel TX
|
|
7
|
nl80211: Add own interface ifindex 3
|
|
8
|
nl80211: Set mode ifindex 3 iftype 3 (AP)
|
|
9
|
nl80211: Failed to set interface 3 to mode 3: -95 (Operation not supported)
|
|
10
|
nl80211: Interface already in requested mode - ignore error
|
|
11
|
nl80211: Setup AP - device_ap_sme=0 use_monitor=1
|
|
12
|
nl80211: Create interface iftype 6 (MONITOR)
|
|
13
|
nl80211: New interface mon.wlan0 created: ifindex=5
|
|
14
|
nl80211: Add own interface ifindex 5
|
|
15
|
BSS count 1, BSSID mask 00:00:00:00:00:00 (0 bits)
|
|
16
|
nl80211: Regulatory information - country=00
|
|
17
|
nl80211: 2402-2472 @ 40 MHz
|
|
18
|
nl80211: 2457-2482 @ 20 MHz
|
|
19
|
nl80211: 2474-2494 @ 20 MHz
|
|
20
|
nl80211: 5170-5250 @ 40 MHz
|
|
21
|
nl80211: 5735-5835 @ 40 MHz
|
|
22
|
nl80211: Added 802.11b mode based on 802.11g information
|
|
23
|
Allowed channel: mode=1 chan=1 freq=2412 MHz max_tx_power=20 dBm
|
|
24
|
Allowed channel: mode=1 chan=2 freq=2417 MHz max_tx_power=20 dBm
|
|
25
|
Allowed channel: mode=1 chan=3 freq=2422 MHz max_tx_power=20 dBm
|
|
26
|
Allowed channel: mode=1 chan=4 freq=2427 MHz max_tx_power=20 dBm
|
|
27
|
Allowed channel: mode=1 chan=5 freq=2432 MHz max_tx_power=20 dBm
|
|
28
|
Allowed channel: mode=1 chan=6 freq=2437 MHz max_tx_power=20 dBm
|
|
29
|
Allowed channel: mode=1 chan=7 freq=2442 MHz max_tx_power=20 dBm
|
|
30
|
Allowed channel: mode=1 chan=8 freq=2447 MHz max_tx_power=20 dBm
|
|
31
|
Allowed channel: mode=1 chan=9 freq=2452 MHz max_tx_power=20 dBm
|
|
32
|
Allowed channel: mode=1 chan=10 freq=2457 MHz max_tx_power=20 dBm
|
|
33
|
Allowed channel: mode=1 chan=11 freq=2462 MHz max_tx_power=20 dBm
|
|
34
|
Allowed channel: mode=0 chan=1 freq=2412 MHz max_tx_power=20 dBm
|
|
35
|
Allowed channel: mode=0 chan=2 freq=2417 MHz max_tx_power=20 dBm
|
|
36
|
Allowed channel: mode=0 chan=3 freq=2422 MHz max_tx_power=20 dBm
|
|
37
|
Allowed channel: mode=0 chan=4 freq=2427 MHz max_tx_power=20 dBm
|
|
38
|
Allowed channel: mode=0 chan=5 freq=2432 MHz max_tx_power=20 dBm
|
|
39
|
Allowed channel: mode=0 chan=6 freq=2437 MHz max_tx_power=20 dBm
|
|
40
|
Allowed channel: mode=0 chan=7 freq=2442 MHz max_tx_power=20 dBm
|
|
41
|
Allowed channel: mode=0 chan=8 freq=2447 MHz max_tx_power=20 dBm
|
|
42
|
Allowed channel: mode=0 chan=9 freq=2452 MHz max_tx_power=20 dBm
|
|
43
|
Allowed channel: mode=0 chan=10 freq=2457 MHz max_tx_power=20 dBm
|
|
44
|
Allowed channel: mode=0 chan=11 freq=2462 MHz max_tx_power=20 dBm
|
|
45
|
Completing interface initialization
|
|
46
|
Mode: IEEE 802.11b Channel: 1 Frequency: 2412 MHz
|
|
47
|
nl80211: Set freq 2412 (ht_enabled=0 sec_channel_offset=0)
|
|
48
|
RATE[0] rate=10 flags=0x1
|
|
49
|
RATE[1] rate=20 flags=0x1
|
|
50
|
RATE[2] rate=55 flags=0x0
|
|
51
|
RATE[3] rate=110 flags=0x0
|
|
52
|
wlan0: Flushing old station entries
|
|
53
|
nl80211: Station flush failed: ret=-22 (Invalid argument)
|
|
54
|
wlan0: Could not connect to kernel driver
|
|
55
|
wlan0: Deauthenticate all stations
|
|
56
|
wpa_driver_nl80211_set_key: ifindex=3 alg=0 addr=(nil) key_idx=0 set_tx=0 seq_len=0 key_len=0
|
|
57
|
wpa_driver_nl80211_set_key: ifindex=3 alg=0 addr=(nil) key_idx=1 set_tx=0 seq_len=0 key_len=0
|
|
58
|
wpa_driver_nl80211_set_key: ifindex=3 alg=0 addr=(nil) key_idx=2 set_tx=0 seq_len=0 key_len=0
|
|
59
|
wpa_driver_nl80211_set_key: ifindex=3 alg=0 addr=(nil) key_idx=3 set_tx=0 seq_len=0 key_len=0
|
|
60
|
Using interface wlan0 with hwaddr 00:08:54:a0:ca:bf and ssid "PiBox"
|
|
61
|
Invalid PSK 'gr1zzl3' on line 1 in '/etc/hostapd-psk'
|
|
62
|
WPA-PSK setup failed.
|
|
63
|
wlan0: Unable to setup interface.
|
|
64
|
wlan0: Flushing old station entries
|
|
65
|
nl80211: Station flush failed: ret=-22 (Invalid argument)
|
|
66
|
wlan0: Could not connect to kernel driver
|
|
67
|
wlan0: Deauthenticate all stations
|
|
68
|
wpa_driver_nl80211_set_key: ifindex=3 alg=0 addr=(nil) key_idx=0 set_tx=0 seq_len=0 key_len=0
|
|
69
|
wpa_driver_nl80211_set_key: ifindex=3 alg=0 addr=(nil) key_idx=1 set_tx=0 seq_len=0 key_len=0
|
|
70
|
wpa_driver_nl80211_set_key: ifindex=3 alg=0 addr=(nil) key_idx=2 set_tx=0 seq_len=0 key_len=0
|
|
71
|
wpa_driver_nl80211_set_key: ifindex=3 alg=0 addr=(nil) key_idx=3 set_tx=0 seq_len=0 key_len=0
|
|
72
|
nl80211: Remove interface ifindex=5
|
|
73
|
netlink: Operstate: linkmode=0, operstate=6
|
|
74
|
nl80211: Set mode ifindex 3 iftype 2 (STATION)
|