Missing hostapd values on save
|Status:||Closed||Start date:||09 Dec 2014|
|Target version:||PiBox - 0.10.0|
|Severity:||03 - Medium|
The following values were in /etc/hostapd.conf, but I'm not sure if they got there from bui-network-config or some other way.
wpa_pairwise=TKIP macaddr_acl=0 ignore_broadcast_ssid=0 hw_mode=g
When Save is used on the hostap page these values were removed from the conf file.
RM #409: The MAC ACL setting is now passed with the normal setAP request so no longer needs a separate defined action in the messaging protocol.
RM #409: Added support for missing hostapd.conf lines to loadHostAP(). This causes the lines in question to show up anytime updates are applied to that file. Removed support for deprecated message action MA_MFENABLE. Enabling MAC ACL is now port of the original setAP() processing.
#1 Updated by Hammel almost 5 years ago
- Status changed from New to Closed
- % Done changed from 0 to 100
Updated both piboxd and piboxwww to support passing the state of MAC ACL use in the MA_SETAP action. Then I updated the appropriate parts of the hostap g_slist in piboxd to include the missing lines. This fixes the problem of the missing lines when the web interface is used to configure the hostap setttings.
Tested on the target and all updates pushed upstream.